Branches Corten Steel Balustrade Infill Panel – Key Points
- High-quality, 3mm weathering Corten steel
- Fully recyclable
- Posts can be surface-mounted or sunken into ground
Balustrade Infill Panels: If installing onto a hard standing, a single panel will require: 1 x Post (cut in half to form 2 x 1.2m posts), 4 x Clamps, 2 x End Caps, 2 x Terrace Feet. Each subsequent panel will require: 0.5 x Posts, 4 x Clamps, 1 x End Cap, 1 x Terrace Foot. If setting the posts into the ground, a single panel will require: 2 x Posts (cut to size on site by installer), 4 x Clamps, 2 x End Caps. Each subsequent panel will require1 Post (cut to size on site by installer) , 4 x Clamps, 1 x End Cap. If Installing for guarding at height you will need a structural engineer to advise you on the correct fixings needed.
See Installation Guide for information on fixing posts into the ground or fixing onto hard standings.
* Subject to structural engineer approval for individual projects. Please make sure you have taken all necessary advice before installing any components for guarding at height. Stark & Greensmith are not liable for the performance of any components once installed.